Download “Aion Rainmeter 3.95 beta 1”
AionRainMeterSetup395_1.exe – Downloaded 950384 times – 71.67 MBDownload “Aion system.cfg editor 1.4”
AionSysEditor_1.4.exe – Downloaded 354478 times – 3.32 MBDownload “Aion PAK extractor tool 0.4”
AionPAKExtract_040.exe – Downloaded 49923 times – 4.19 MBDownload “Server Status App 1.3”
Servers_14.exe – Downloaded 26660 times – 3.12 MBOct 21st 2106: 2.4 version removed. It was downloaded over 268.000 times, and updated over 1 million!
Windows: Vista to Windows 11
Client support:
- Europe (English, French, German) + PTS
- USA (English) + Classic
- Russia + Classic
- Japan + Classic
Private servers: (not updated)
- EuroAion
- Aion Empire 3.0
License Agreement: (mandatory read and acceptance before downloading and using this application)
Aion RainMeter 3.x by Rainy.ws, also defined by “ARM”.
End User License Agreement
PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE.
By using or installing the software or any related files, you are agreeing to the terms of this license.
BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO NOT USE THE SOFTWARE.These terms apply to the software you are downloading from Rainy.ws, which includes the media on which you received it, if any.
The terms also apply to any Rainy.ws* updates,
* supplements,
* Internet-based services, and
* support services1. By downloading and using Aion RainMeter, you hereby acknowledge and agree to the following:
* You are not allowed to use this tool while running cheating/hacking applications like AS and similar.
2. COPYRIGHT
This software is copyright (c) 2012, Rainy.ws.
Rainy.ws retains title and ownership rights in the Software. The Software is protected by the copyright laws and treaties.
3. GRANT OF LICENSEThis EULA grants you the following rights: installation and personal, non-commercial use only. You may install and use an unlimited number of copies of the SOFTWARE PRODUCT.
ARM is freeware, however the license is subject to change, in which case it would be notified in the application’s website following an update.
The software is licensed, not sold. This agreement only gives you some rights to use the software. Rainy.ws reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways.
4. RESTRICTIONSYou may not:
* work around any technical limitations in the binary versions of the software;
* reverse engineer, decompile or disassemble the binary versions of the software, except and only to the extent that
applicable law expressly permits, despite this limitation;
* make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;
* publish the software for others to copy;
* rent, lease or lend the software;
* transfer the software or this agreement to any third party; or
* use the software for commercial software hosting services.
5. DISCLAIMERNO WARRANTIES.
AUTHOR AND ANY LICENSOR EXPRESSLY DISCLAIM TO THE FULLEST EXTENT PERMITTED BY LAW ANY WARRANTY FOR THE SOFTWARE PRODUCT. THE SOFTWARE PRODUCT AND ANY RELATED DOCUMENTATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. AUTHOR AND LICENSOR DISCLAIM ANY WARRANTIES REGARDING THE SECURITY, RELIABILITY, TIMELINESS AND PERFORMANCE OF THE SOFTWARE PRODUCT. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE PRODUCT REMAINS WITH YOU.NO LIABILITY FOR DAMAGES.
IN NO EVENT SHALL AUTHOR OR LICENSOR BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF AUTHOR OR LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. UNDER NO CIRCUMSTANCES SHALL AUTHOR OR LICENSOR BE LIABLE TO ANY USER ON ACCOUNT OF THAT USER’S USE OR MISUSE OF THE SOFTWARE PRODUCT. SUCH LIMITATION OF LIABILITY SHALL APPLY TO PREVENT RECOVERY OF DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, AND PUNITIVE DAMAGES WHETHER SUCH CLAIM IS BASED ON WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE (EVEN IF AUTHOR OR LICENSOR HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES). SUCH LIMITATION OF LIABILITY SHALL APPLY WHETHER THE DAMAGES ARISE FROM USE OR MISUSE OF AND RELIANCE ON THE SOFTWARE PRODUCT, FROM INABILITY TO USE THE SOFTWARE PRODUCT, OR FROM THE INTERRUPTION, SUSPENSION OR TERMINATION OF THE SOFTWARE PRODUCT (INCLUDING SUCH DAMAGES INCURRED BY THIRD PARTIES). SUCH LIMITATION SHALL APPLY NOTWITHSTANDING A FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY AND TO THE FULLEST EXTENT PERMITTED BY LAW.Because this software is “as is,” we may not provide support services for it.
6. DISTRIBUTIONYou may NOT distribute this application
7. TERMINATIONWithout prejudice to any other rights, AUTHOR may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT and all of its component parts.
If you have any questions about this license or if you want to contact Rainy.ws for any reason please visit http://www.Rainy.ws and use the contact form.
@Eric
Emailed you my system.cfg
@admin =/ I tried, same thing happen, when I open ARM it says “Warning: chat.log is not enabled, you need to enable it in the setting”. So I went in, select aion folder path, went to setting and did the enable log thing, it gave me a message ” chat.log will be created when you log in one character”. I logged in and it still says “chatlog not found. Click to retry” and when I click it says error opening the chat.log =/ Already running in admin. When I go to the file tab and click process another log file,… Read more »
hi, after 3.1 update i get a error when open the 64 bit client by arm, is that arm bug or aion itself?
what publisher has 3.1?
@Eric
Sorry that actually broke it. Uploaded a new installer, try now again if you downloaded before this post.
@Eric
Updated the single sys editor as well.
@Eric
Hmm Chinese.. ok. I tried something, added UTF8 support to the routines for loading/saving the file. Please redownload the installer and try now :)
@Eric
nvm my question, found the solution xD need to change it to window full screen….. So back to your program, is it possible that my chinese window causing your program to malfunction? Cos I read your FAQ, it is suppose to add a line – g_chatlog = “1″ to the system.cfg right? But I see my system.cfg to have this 擬擬g = “1? instead and I suppose they are the same, could this be the problem?
@admin
its a chinese window 7 but it support English as well. I have another question, I used to be able to alt tab aion and put i.e. a browser on top of aion without pausing it, after used your tool whenever I alt tab it auto minimized and also pausing it causing it to dc after a while =/ is there anyway to change it back? thanks for the help!
@admin Still says Chat.log file not found, error opening log file. I did some research on web and found this: ” You recently remove the ability to edit the system.cfg in order to fullfill the ToS. Correct me if I’m wrong, but don’t you edit the system.cfg anyways to enable the chatlog?” from here http://www.aionsource.com/topic/128713-aion-rainmeter-new-dmg-meter-tool/page__st__400 Could that be the problem? I tried using the AionSysEditor but have no idea how to use it cos its all monster language when I open system.cfg e.g. 擬xB鴛R擬擬n = “0? 擬黔R擬擬餛M擬擬?= “48.000000” 擬黔R擬擬?= “1” 擬髭 = “1360” 擬擬擬擬LOD = “1.000000” 擬擬擬擬c = “0.000000” 擬擬g… Read more »
That’s really odd. When you open the system.cfg with my other tool, it should look decrypted, like:
etc
Is your windows English?
@Eric
Try running ARM as admin, then enable chatlog again.
c:\program files (x86)\gameforge\aion free-to-play\ Nothing on system.cfg =/
@Eric
Did it give any error about system.cfg? what path did you set for the Aion root folder?
still doesn’t work =/ it says Error opening log file “Chat.log file not found, click here for help” and it redirect me to the faq page
Help please! I keep getting “chatlog not found” error =/ I did the setting thing and it says the chatlog will be created once I log into a character or something but it didn’t work
You have to click “Enable chatlog” while Aion is closed, then start Aion, and once you are logged in with a character (past the char selection screen) the client will create the file and ARM will pick it up. If it doesn’t, click on the red-colour “try again” link.
@Aely
The issue is when there is more than 1 mob with the same name, you can’t tell which dot belongs to which then.
As for the logs/2 clients, you can also run a 2nd ARM instance as “portable” mode, using “/portable” as parameter. That will create an “AppData” folder where it resides to use for the settings, separated from the other instance which uses user/appdata/roaming.
@admin Thank you, it worked, what I did was to copy the ncsoft folder, and then I disabled the log on program, and changed the path in the ARM to ncsoft2(the copy) then enabled log again, and chose to open the Aion by the program, and logged the client which I want to log, then I opened the normal launcher and opened the second and its working, just one log now, thanks by the way just a question, when I read the F.A.Q. it was saying that about dot skills it’s not accurate because the dot just shows the first… Read more »
Hello, the software is working very well, BUT I have a problem, when I do some instances with my friends sometimes I have to go into two Aion clients, and if I open the rainmeter with 2 clients, it seems like my dps shows duplicated as “me” but thats not a problem because I can still see both names individual dps I think because each client logs the other client DPS, but the other members of the group shows duplicated dps or something like. My question is if there is something I can to not get double other people damage… Read more »
You are gonna need 2 separate folders with a copy of the client for that, to have separate log files.
I have an issue. My ARM 1.2 is almost transparent and I can barely see it at all. How do I fix this? I’ve searched all over and can’t find it.
Try deleting the settings file in user/appdata/roaming/aion rainmeter (with arm closed)
@sheila
You can use the contact form in the Contact page btw so I can help you directly with this, will be easier than through replies in the comments.
@sheila
hmm weird. try deleting the application appdata folder, then run the program again. If you are using Vista or Windows7 it will be located at:
“c:\Users\{user}\AppData\Roaming\Aion RainMeter”
@admin
I think what i entered was Daisy, Nexus
I dont even get the chance to change it now, I wanna enter more chars
@sheila
What’s your character name and server?
@admin
No error message, no..it just goes away (as if it was minimzed)
and i dont even remember the settings i entered cause it was some weeks ago and they dont come up anymore :S
So…I wanted to check out this program so i download it, install it, follow the tutorial and select the chatlog file, name of my characters and click save. Then the window minimizes or goes away i dont know…I couldnt seem to be able to launch it after that. I uninstall and re-install several times and each time it does the same thing. It like has my preferences saved but it won’t really start cause the window closes the smae second i launch it. I have checked the antivirus, its not causing problems. Any1 knows what it is?
Does it give any error message in the tray? What’s your char name and server?
@admin
saw it XD but the mp recovery from chanter mantra were loged
@mischamd
The log is way too bad for heal parsing.
can you add a parser for healers?
@admin
None i don’t use any.
@Sicko89
Fixed!
@Sicko89
What antivirus/protection app do you use?
KK, another problem now.
I’m using Norton 360 and I just launched my computer and Norton deleted Aion Rainmeter.
What can I do to prevent it from deleting it?
Thanks.
Add it to exceptions somewhere in the settings. Norton is pretty bad though, would never recommend it -.-
Error appears when i try to update to the latest version

Hi!
I just downloaded Rainmeter and I have a problem.
I want it to appear on top everytime but when I mark that option and click on the game Rainmeter just goes under the game.
anything to do?
thanks :)
Windows 7 Ultimate 64 bit
playing on windowed mode
Hi, not sure what could be the issue. I use also windowed mode on w7 x64, no problems here, arm stays on top normally with the option set.
@Earfart
Hi, I’d need some details about the error messages.
I just installed it and ran it. I’m on W7 and I’ve installed ARM on a separate harddisk. I double clicked the tray and I started to get lots of memory access violation errors. I have no screenshots as there were several. I launched it after installing it using the installer btw.
@Jannetje1972
I’ll have another look at heals when 3.0 is out in Europe.
@admin
Seems that the roaming files messed things up.
After deinstall and removing those files by hand it seems to be working again :)
Sad to hear that getting Healing results is such a drama … with that you could make a lot of cleric players real happy ^^
Keep up the good work :)
Great tool … to bad it now only stays minimized after update and I cant seem to get it active in any way at the moment (build 96)
Feature request … Would love to see a Healing part beside the dps ;-)
weird issue, can you elaborate on it?
Healing is difficult, the log for heals is even worse than dmg.
@Eith
I banned your name in the meter a while ago, just it wasn’t working properly before to shutdown; contact me in-game if you wanna fix that.
yes
@Eith
Are you maybe Eithel from tele?
hi all, im testing this version and i have some issues, i had 0.93 and all worked nice, but now with this 0.95 i have a crash everytime i try to save settings with my char name into box, i mean i can save it and all its ok, but when i close and re-open arm..crash crash crash crash and i need to reinstall all, delete roaming data etc..etc.. T__T
you are probably using the german or french client, you need the English one.
Anyone tell me how i can add self and other player to see dmg?i only see black screena without names and idk how it work,pls guide
Not yet, there will be a setting to edit group members in final 1.0 version
wonderfull tool you do a great job its better than kdm but is there an option to stop log all players around me who are not in my group?
Don’t think it’s possible to change the file location :(
@admin
TY, sir. You don’t happen to know a command parameter in the system.ovr to indicate a different path location than \Program Files(x86)\NCSoft\Aion for the Chat.log, do you?
I find this tool really useful but during sieges my laptop does feel the stress of Aion processing the Chat.Log file. (I know this has nothing to do with the “Siege Mode” option)
The aion client version doesn’t matter, you can use both 32/64 aion with either version. The 64-bit tool is for 64-bit Windows versions.
Is the 64-bit tool meant for the Aion 64-bit Client or it’s just for the Win 7?